sikatop seal 107 product data sheet

exposed.
The user of the product must test the products suitability for the intended data application and purpose.
p p Protect freshly applied material from freezing conditions and rain etc.
Rating * Nickname * Summary of Your sheet Review * Review Questions?Inappropriate, you have already flagged this document.p p Ambient Temperature 8C min.The surface must be pre-wetted sikatop to a saturated surface dry condition before application.For waterproofing: apply two coats at 40 mils per coat.Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.p p Application Instructions Mixing Used as slurry: A : B product 1 : 4 (parts by weight) /p p Used as mortar: A : B 1 :.5 -.1 ( parts seal by weight) /p p Mixing Time 3 minutes /p p Mixing Tools SikaTop.p p Application Method / Tools /p p Shake part A before using.p p sika limited Head Office Watchmead Welwyn Garden City Hertfordshire AL7 1BQ United Kingdom Phone: Fax. Leaching, outside the tank: Ground Water Infiltration and Seepage, efflorescence sPorous Surfaces.
Approved for potable water contact.
p p Apply the 2nd coat of SikaTop Seal-107 as soon as the first coat has hardened.
Tolerates fine cracks in concrete substrate.p p Local Restrictions Please note that as a result of specific local regulations the performance of this product may vary from country to seal country.p p Curing Details Curing Treatment It is essential to sikatop sikatop cure SikaTop Seal-107 immediately after application seal for a /p p minimum of 3 to 5 days to ensure full cement hydration sheet and to minimise cracking.Write Your Own Review You're reviewing: sikatop sheet seal 107 cementitious waterproofing How do you rate this product?For internal and external waterproofing and damp-proofing concrete, mortar blockwork and brickwork.For sealing hairline cracks in concrete structures not subject to movement surfaces.Add the remainder of part A and continue mixing until a uniform lump free consistency is achieved.For a smoother finish apply.5mm maximum.